Bedienungsanleitung APC AP9571

APC AP9571

Sprache(n):
Englisch


Dateigröße:
220,89KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 1

Hersteller:
APC 

  • Stromverteilereinheit APC AP9571


  • Vorschau APC AP9571 Handbuch:
    2 Rack Power Distribution Unit — AP9571 Safety and Grounding Read the following information before installing or operating your APC Power Distribution Unit (PDU): • This PDU is intended for indoor use only. • Do not install this PDU where excessive moisture or heat is present. • Never install any wiring, equipment, or PDUs during a lightning storm. • Plug this PDU into a three-wire, grounded power outlet only. The power outlet must be connected to appropriate branch circuit/ mains protection (fuse or circuit breaker). Connection to any other type of power outlet may result in a shock hazard. • Use only the supplied brackets for mounting. • Do not use extension cords or adapters with this PDU. • Do not work alone under hazardous conditions. • Check that the power cord, plug, and socket are in good condition. • Disconnect the PDU from the power outlet before you install or connect equipment to reduce the risk of electric shock when you cannot verify grounding. Reconnect the PDU to the power outlet only after you make all connections. Warning Risk of electrical shock. Use only the supplied hardware to attach the mounting brackets. Rack Power Distribution Unit — AP9571 3 Installation Horizontal mounting (any standard 19-inch EIA-310-D rack or enclosure) Install the PDU in a NetShelter® or any other standard 19-inch EIA-310-D rack or enclosure, using the mounting brackets (provided). 1. Attach the horizontal-mounting brackets to the PDU. 2. Install the PDU using hardware included with your rack or enclosure. The PDU will occupy one U-space. Installation 4 Rack Power Distribution Unit — AP9571 Vertical mounting (any standard EIA-310-D rack or enclosure) Install the PDU in a NetShelter or any other standard 19-inch EIA-310-D rack or enclosure, using the mounting brackets (provided). 1. Attach the vertical-mounting brackets to the PDU. 2. Install the PDU on a vertical mounting rail in your rack or enclosure. Rack Power Distribution Unit — AP9571 5 Specifications AP9571 Electrical Nominal input voltage 208 V Acceptable input voltage ± 10% Nominal input voltage Input frequency 50– 60 Hz Cord length 12 ft (3.7 m) Input connector NEMA L6-30 plug Output connectors (12) IEC 320 C13 outlets Maximum total current draw 24 A Physical Size (H × W × D) 17.5 ×1.7×2.5 in (44.5 ×4.4×6.4 cm) Weight 5.6 lb (2.5 kg) Shipping weight 8.0 lb (3.6 kg) Environmental Elevation (above MSL) Operating Storage 0–15,000 ft (0–4500 m) 0–50,000 ft (0–15 000 m) Temperature Operating Storage –5 to 45° C (23 to 115° F) –25 to 65° C (–13 to 149° F) Humidity Operating Storage 5–95% RH Non .....
    Klicken Sie jetzt für den Download