Bedienungsanleitung APC UPS ES 550




DSL 16k: 1s

Downloads bisher: 6


  • Datensicherungsgeraet APC UPS ES 550

  • Vorschau APC UPS ES 550 Handbuch:
    Troubleshooting Use the table below to solve minor Back-UPS ES installation or operation problems. Consult APC Online Technical Support or call APC Technical Support for assistance with problems that cannot be resolved using the table below: Problem Solution Specifications Warranty Service Input Voltage 230 Vrms Nominal Frequency 50 - 60 Hz (auto sensing) Brownout Transfer 180 Vrms, typical Over-voltage Transfer 266 Vrms, typical Output Voltage On Battery 230 Vac rms +/- 8% Total Amperage (8 outlets) 10 Amps (including UPS output) UPS Capacity (4 outlets) 400VA/240W 550VA/330W 700VA/405W Frequency - On Battery 50/60 Hz +/-1 Hz Transfer Time 6 ms typical, 10 ms maximum Protection and Filter AC Surge Protection Full time, 310 joules Phone/fax/DSL Surge Protection Single line (2-wire) Network Surge Protection 10/100Base-T Ethernet EMI/RFI Filter Full time AC Input Resettable circuit breaker Battery Type Sealed, maintenance-free lead acid Average Life 3 - 5 years depending on the number of discharge cycles and environmental temperature Physical Net Weight 5.4kg 6.4kg 6.8kg Dimensions (H x W x D) 285 x 230 x 86 mm (11.18” x 9.05” x 3.3 in.) Operating Temperature 0 oC to 40 oC (32 oF to 104 oF) Storage Temperature -15 oC to 45 oC (5 oF to 113 oF) Operating Relative Humidity 0 to 95% non-condensing Operating Elevation 0 to 3000 m (0 to 10,000 ft) Safety/Regulatory Safety Approvals CE, Nemko-GS, PCBC, GOST, IEC62040-1-1, IEC60884 EMC Compliance EN50091-2, EN55022 Class B The standard warranty is 3 years from the date of purchase. APC’s standard procedure is to replace the original unit with a factory reconditioned unit. Customers who must have the original unit back due to assigned asset tags and set depreciation schedules must declare such a need at first contact with APC Technical Support. APC will ship the replacement unit once the defective unit is received by the repair department or cross-ship upon the provision of a valid credit card number. The customer pays for shipping to APC, and APC pays ground freight transportation costs back to the customer. Please DO NOT RETURN Back-UPS ES to the place of purchase under any circumstances. 1. Consult the Troubleshooting section to eliminate common problems. 2. Verify the battery is connected (see Connect Battery) and that the Circuit Breaker is not tripped (see Troubleshooting section). If you still have problems or questions, please contact APC via the internet or at one of the phone numbers listed below. 3. Before contacting APC, please be sure to record the date purchased, UPS model, and serial number (on bottom of unit). 4. Be prepared to troubleshoot t .....
    Klicken Sie jetzt für den Download