Bedienungsanleitung DLS RS6A

DLS RS6A

Sprache(n):
Englisch


Dateigröße:
199,94KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 2

Hersteller:
DLS 

  • Sound System DLS RS6A


  • Vorschau DLS RS6A Handbuch:
    Model Woofer Tweeter Nom. Max Sensi- Magnet Inst. Mounting Crossover power power tivity size depth hole PS4/4A 10 cm / 4” 20 mm / 0,8” 50 W 80 W 90 dB 80 mm / 3,15” 50 mm /1,97” 98 mm / 3,85” Separate boxes RS5/5A 13 cm / 5,25” 25 mm / 1” 50 W 80 W 92 dB 90 mm / 3,54” 45 mm / 1,77” 117 mm / 4,6” Separate boxes RS6/6A 16,5 cm / 6,5” 25 mm / 1” 50 W 80 W 92 dB 90 mm / 3,54” 53 mm / 2,09” 146 mm / 5,75” Separate boxes R4 10 cm / 4” 20 mm / 0,8” 50 W 80 W 94 dB 80 mm / 3,15” 60 mm / 2,36” 102 mm / 4” Separate box R5A 13 cm / 5,25” 25 mm / 1” 80 W 120 W 94 dB 90 mm / 3,54” 60 mm / 2,36” 120 mm / 4,72” Separate box R6A 16,5 cm / 6,5” 25 mm / 1” 80 W 120 W 94 dB 100 mm / 4” 76 mm / 3” 140 mm / 5,5” Separate box R964 6 x 9” 25 mm / 1” 80 W 120 W 93 dB 120 mm / 4,7” 90 mm / 3,54” 150x220 mm / 5,9x8,7” Separate box R1073 7 x 10”/ 50 mm mid. 20 mm / 1” 100 W 150 W 93 dB 145 mm / 5,7” 80 mm / 3,15” 156x225 mm / 6,15x8,86” Separate box MS5A 13 cm / 5,25” 28 mm / 1,1” 80 W 120 W 90 dB 90 mm / 3,54” 58 mm / 2,28” 120 mm / 4,72” Separate box MS6A 16,5 cm / 6,5” 28 mm / 1,1” 100 W 150 W 92 dB 100 mm / 4” 67 mm / 2,64” 140 mm / 5,5” Separate box SPEAKER FACTS FOR DLS REFERENCE SERIES RUNNING-IN PERIOD Allow the speakers to play for at least 15-20 hours. After this time the performance is correct. Filter installation and connection of R4, R5A & R6A FILTER/CROSSOVER INSTALLATIONS CONNECTION OF SPEAKERS Make sure you connect the cables with correct polarity to the speakers. Observe the markings on the terminal. The small terminal is minus. SPEAKER PHASING To be sure to have the correct speaker polarity (phase) you can check this by using a 1,5 Volt battery. Connect a cable from the battery plus-pole to the speaker plus, and a cable from the battery minus to the speaker minus. If the speakers are correctly connected the speaker cone should move outwards on both right and left channel. This check must be made on the cables going from the speakers, to the output terminals of your car stereo or amplifier. R4 tweeter level select: Select tweeter level by moving the jumpers inside the filter box between high or low. Make your own tests for best result. Tweeter level: Jumper position J1 J2 High Hi Hi Mid Hi Lo Low Lo Lo Filter installation and connection of PS4A, RS5A & RS6A R5A, R6A tweeter level select: Select tweeter level by moving the jumper inside the filter box between high, mid or low. Make your own tests for best result. Tw level Hi Mid Low Tw level Hi Mid Lo Tweeter level select: Select tweeter level by moving the jumper i .....
    Klicken Sie jetzt für den Download