Bedienungsanleitung DLS RS6N

DLS RS6N

Sprache(n):
Englisch


Dateigröße:
195,28KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 1

Hersteller:
DLS 

  • Sound System DLS RS6N


  • Vorschau DLS RS6N Handbuch:
    Model Woofer Tweeter Nom. Max Sensi- Magnet Inst. Mounting Crossover power power tivity size depth hole RS5N 13 cm / 5,25” 25 mm / 1” 50 W 80 W 92 dB 90 mm / 3,54” 45 mm / 1,77” 117 mm / 4,6” Separate boxes RS6N 16,5 cm / 6,5” 25 mm / 1” 50 W 80 W 92 dB 90 mm / 3,54” 53 mm / 2,09” 146 mm / 5,75” Separate boxes R4 10 cm / 4” 20 mm / 0,8” 50 W 80 W 94 dB 80 mm / 3,15” 60 mm / 2,36” 102 mm / 4” Separate box R5A 13 cm / 5,25” 25 mm / 1” 80 W 120 W 94 dB 90 mm / 3,54” 60 mm / 2,36” 120 mm / 4,72” Separate box R6A 16,5 cm / 6,5” 25 mm / 1” 80 W 120 W 94 dB 100 mm / 4” 76 mm / 3” 140 mm / 5,5” Separate box R1073 7 x 10”/ 50 mm mid. 20 mm / 1” 100 W 150 W 93 dB 145 mm / 5,7” 80 mm / 3,15” 156x225 mm / 6,15x8,86” Separate box MS5A 13 cm / 5,25” 28 mm / 1,1” 80 W 120 W 90 dB 90 mm / 3,54” 58 mm / 2,28” 120 mm / 4,72” Separate box SPEAKER FACTS FOR DLS REFERENCE SERIES RUNNING-IN PERIOD Allow the speakers to play for at least 15-20 hours. After this time the performance is correct. Filter installation and connection of R4, R5A & R6A FILTER/CROSSOVER INSTALLATIONS CONNECTION OF SPEAKERS Make sure you connect the cables with correct polarity to the speakers. Observe the markings on the terminal. The small terminal is minus. SPEAKER PHASING To be sure to have the correct speaker polarity (phase) you can check this by using a 1,5 Volt battery. Connect a cable from the battery plus-pole to the speaker plus, and a cable from the battery minus to the speaker minus. If the speakers are correctly connected the speaker cone should move outwards on both right and left channel. This check must be made on the cables going from the speakers, to the output terminals of your car stereo or amplifier. R4 tweeter level select: Select tweeter level by moving the jumpers inside the filter box between high or low. Make your own tests for best result. Tweeter level: Jumper position J1 J2 High Hi Hi Mid Hi Lo Low Lo Lo Filter installation and connection of RS5N & RS6N R5A, R6A tweeter level select: Select tweeter level by moving the jumper inside the filter box between high, mid or low. Make your own tests for best result. Tw level Hi Mid Low Tweeter level select: Select tweeter level by moving the jumper inside the filter box between +2 dB (high level) or 0 (low level). Make your own tests for best result. Black/blue + + - - IN TWEETER + - + - Tweeter + - Head unit / amp + - Woofer + - IN WOOFER + - + - Silver/red Silver Black/blue Black Head unit / amp. + - + - 2-way crossover INPUT WOOFER TWEETER + - + - + - + - Woofer Tweeter Black Silver/red Silver Hi Low Hi Low J .....
    Klicken Sie jetzt für den Download