Bedienungsanleitung Gemini PDM 18

Gemini PDM 18



DSL 16k: 1s

Downloads bisher: 21


  • Soundanlage Gemini PDM 18

  • Vorschau Gemini PDM 18 Handbuch:
    Page2 54 53 53 55 51 56 52 52 50 50 48 49 49 47 47 46 46 45 45 44 44 43 43 42 42 41 41 57 40 Page3 Introduction Congratulations on purchasing the Gemini PDM-18 mixer. This state of the art mixer is backed by a three year warranty, excluding crossfader and channel slides. Prior to use, we suggest that you carefully read all the instructions. Features • 4 Stereo Channels • State of the Art Cue Section • 3 Phono/Line Convertible, 5 Line, and 2 Mic Inputs • Dual 7 Band Graphic Equalizers • Talkover • Master, Booth and Record outputs • 6 sound effects • Echo section Cautions 1. All operating instructions should be read before using this equipment. 2. To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician. In the U.S.A., if you have any problems with this unit, call 1-732-738-9003 for customer service. Do not return equipment to your dealer. 3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES. Connections 1. Before plugging in the power cord, make sure that the VOLTAGE SELECTOR (40) switch is set to the correct voltage. NOTE: This product is double insulated and not intended to be grounded. 2. Make sure that the POWER (33) switch is in the off position. The POWER LED (34) will be off. 3. The PDM-18 is supplied with 3 sets of amp output jacks. The MAIN OUTPUT (41) jacks are unbalanced and used to connect to your main amplifier. The REC OUTPUT (43) jacks can be used to connect the mixer to the record input of your recorder enabling you to record your mix. The BOOTH OUTPUT (42) jacks allow you to hook up an additional amplifier. 4. The MIC 1 (1) input (found on the front panel) accepts a 1/4" or XLR connector. The MIC 2 (55) input (found on the rear panel) accepts 1/4" connectors. All accept balanced and unbalanced microphones. 5. On the rear panel are 3 stereo PHONO/LINE (47, 50, 53) inputs and 5 stereo LINE (44, 45, 46, 49, 52) inputs. The PHONO/LINE SWITCH (48) enables you to set the (47) input to Phono or Line. The PHONO/LINE SWITCH (51) enables you to set the (50) input to Phono or Line. The PHONO/LINE SWITCH (54) enables you to set the (53) input to Phono or Line. The phono inputs will .....
    Klicken Sie jetzt für den Download