Bedienungsanleitung Gemini PMX 80

Gemini PMX 80



DSL 16k: 1s

Downloads bisher: 18


  • Sound System Gemini PMX 80

  • Vorschau Gemini PMX 80 Handbuch:
    Page2 7 6 1 1 2 2 3 3 4 4 5 5 8 10 9 Page3 19 11 12 20 29 30 33 23 24 16 34 25 28 27 13 21 22 14 15 31 32 26 17 35 36 18 Page4 Introduction Congratulations on purchasing the Gemini PMX-80 mixer. This state of the art mixer includes the latest features and is backed by a three year limited warranty, excluding crossfader and channel slides. Prior to use, we suggest that you carefully read all the instructions. Features • 2 Stereo channels • 2 Phono/Line Convertible, 1 Phono, 1 Line and 1 Mic input • 1/4" DJ Mic jack • Low, Mid, High and Gain controls on each channel • Master output control • Cue section Cautions 1. All operating instructions should be read before using this equipment. 2. To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician. In the U.S.A., if you have any problems with this unit, call 1-732-738-9003 for customer service. Do not return equipment to your dealer. 3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DONOTEXPOSETHISUNITTORAINORMOISTURE. 7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLSORSWITCHES. Connections 1. Make sure that the POWER (6) switch is in the OFF position. This unit comes supplied with a 15 volt AC adaptor. Plug the male pin of the adaptor into the rear panel POWER JACK (7). Then plug the adaptor into a proper power source. 2. The MASTER OUTPUT (1) jacks are unbalanced and used to connect to your main amplifier. 3. The DJ MIC (18) input (found on the front panel) accepts a 1/4" connector and balanced and unbalanced microphones. 4. On the rear panel are 2 stereo PHONO/LINE (3, 4) inputs, 1 stereo PHONO (5) input and 1 stereo LINE (2) input. The PHONO/LINE SWITCHES (8, 10) enable you to set the (3, 4) inputs to Phono or Line. The phono inputs will accept only turntables with a magnetic cartridge. A GROUND SCREW (9) for you to ground your turntables is located on the rear panel. The stereo line inputs will accept any line level input such as a CD player, a cassette player, etc. 5. Headphones can be plugged into the front panel mounted HEADPHONE (36) jack. Operation 1. POWER ON: Once you have made all the equipment connections to your mixer, press the POWER (6) switch. The power will turn on and the POWER LED (23) will glow RED. 2. CHANNEL 1: The GAIN (11 .....
    Klicken Sie jetzt für den Download