Bedienungsanleitung Hama 00050601

Hama 00050601



DSL 16k: 1s

Downloads bisher: 1


  • Druckerzubehoer Hama 00050601

  • Vorschau Hama 00050601 Handbuch:
    Please read the following instructions carefully and observe the safety instructions. 1. Safety instructions Before you use the refill kit, there are a few basic points to bear in mind. Quality inks will adhere to all absorbent textiles and can quickly cause unsightly stains. To prevent ink damage in advance, please adhere to the following instructions: - The refill kit can only be used successfully with the empty original cartridge if it is still in working order. If the cartridge is damaged or contains dried residue, we cannot guarantee that it will function correctly after it has been refilled. - Do not wait until your cartridge is completely empty before you refill it. You should refill the cartridge as soon as the print starts to become fainter or white stripes appear in the text. This will prevent the ink drying in the cartridge and will thus extend its service life. - Only use the refill kit in a safe place to prevent staining. To be completely sure you should wear old clothes so that if any ink sprays nothing of value will be damaged. Lay out an old newspaper on the worktop on which you intend to use the refill kit. - Keep the kit out of the reach of children and wear the gloves supplied before and whilst you use the kit. Hama GmbH & Co. cannot accept any liability for clothing, furniture or other items that may be soiled with ink. If, despite all your precautions, fresh ink gets on to your textiles, wash it out immediately in lukewarm water using a brush and soap. 2. To refill the cartridge Preparation: Put on the supplied gloves and carefully open a bottle of ink. When you have unscrewed the cap, affix the needle and safety cap securely to the top of the bottle. Note: There are currently two different types of black Lexmark cartridges on the market. The following contains separate instructions for both types. Please follow the appropriate set of instructions for your cartridge type. 2.1 Using the refill kit on cartridge type 1 Step 1: Take the empty original cartridge out of your printer and place it on a firm worktop, which you have previously covered with newspaper. Step 2: Position the drill carefully between the cover and the casing (see illustration) and start to drill clockwise until the cover raises. Then carefully take the cover fully off the cartridge. Step 3: Place the cartridge into the mounting supplied with the kit so that the button is on the inserted rubber and you can see the label. Now affix the supplied label over the manufacturer’s label on the cartridge so that you can tell which ink belongs in which tank. Now fill the various tanks with the appropriate ink by removing th .....
    Klicken Sie jetzt für den Download