Bedienungsanleitung Hama 00050604

Hama 00050604

Sprache(n):
Multi

Dateigröße:
242,99KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 15

Hersteller:
Hama 

  • Druckerzubehoer Hama 00050604


  • Vorschau Hama 00050604 Handbuch:
    Please read the following instructions carefully and observe the safety instructions. 1. Safety instructions Before you use the refill kit, there are a few basic points to bear in mind. Quality inks will adhere to all absorbent textiles and can quickly cause unsightly stains. To prevent ink damage in advance, please adhere to the following instructions: - The refill kit can only be used successfully with the empty original cartridge if it is still in working order. If the cartridge is damaged or contains dried residue, we cannot guarantee that it will function correctly after it has been refilled. - Do not wait until your cartridge is completely empty before you refill it. You should refill the cartridge as soon as the print starts to become fainter or white stripes appear in the text. This will prevent the ink drying in the cartridge and will thus extend its service life. - Only use the refill kit in a safe place to prevent staining. To be completely sure you should wear old clothes so that if any ink sprays nothing of value will be damaged. Lay out an old newspaper on the worktop on which you intend to use the refill kit. - Keep the kit out of the reach of children and wear the gloves supplied before and whilst you use the kit. Hama GmbH & Co. cannot accept any liability for clothing, furniture or other items that may be soiled with ink. If, despite all your precautions, fresh ink gets on to your textiles, wash it out immediately in lukewarm water using a brush and soap. 2. To refill the cartridge Preparation: Put on the supplied gloves and carefully open a bottle of ink. When you have unscrewed the cap, affix the needle and safety cap securely to the top of the bottle. Step 1: Take the functional, almost empty original cartridge out of your printer and affix one of the supplied labels on to the small opening (see illustration) on the underside of the cartridge. Step 2: Insert the cartridge into the refilling station and seal the centre opening with the supplied (oran- ge) pin. (see illustration). Now carefully drill a refill opening at the specified point on the cartridge (see illustration). Step 3: Now take the refill bottle and remove the safety cap from the needle. Now insert the needle completely into the refill opening (see illustration). Squeeze the bottle very carefully. Fill the cartridge with a maximum of 25 ml (which corresponds to approx. 5 lines on the bottle) by squeezing the bottle very care- fully. Step 4: After you have refilled the cartridge seal the refill opening using one of the stoppers supplied (see illustration). Step 5: Now take the pin out of the centre of the cartridge. Step .....
    Klicken Sie jetzt für den Download