Bedienungsanleitung Ion FILM 2 SD

Ion FILM 2 SD

Slide Scanner Ion FILM 2 SD

Sprache(n):
Multi


Dateigröße:
363,04KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 0

Hersteller:
Ion 

Vorschau Ion FILM 2 SD Handbuch:
2 PLACING SLIDES & NEGATIVES IN THE HOLDERS 1. Open the film holder by lifting the tab on the bottom. 2. Insert the slide(s) into the slide slot(s) or lay the negative over the negative slot. 3. Close the film holder. Be sure the latch and sides of the holder are securely in place. Only push the holder through the FILM HOLDER SLOT in the direction of the arrow (from right to left). Note: If the image is scanned upside down or mirrored, you can also correct this by using the FLIP or MIRROR buttons later. Tip: To avoid laying a negative in the wrong direction (which will produce a mirror image), be sure you can correctly read the serial numbers at the top of the negative when placing it in the holder. Slides Negatives 3 QUICKSTART 1. Connect FILM2SD to your computer’s USB port or to a power outlet with the included power adapter. 2. Turn on the FILM2SD with the POWER button. 3. Place your slide(s) or negative into the appropriate holder. Be sure the latch and sides of the holder are securely in place. 4. Insert the holder into the FILM HOLDER SLOT. Only push the holder through the FILM HOLDER SLOT in the direction of the arrow (from right to left). 5. Insert your SD card with the label facing down into the SD CARD SLOT. When you save your scanned images, they will be stored on the SD card. 6. Capture your image by pressing the OK button. 7. Press the OK button again to save the image. 8. Turn off FILM2SD before removing your SD card (otherwise its contents may be lost). To eject your SD card from the SD CARD SLOT, push it in first, then pull it out of the slot. Now you can insert it into an SD-compatible device, such as a digital picture frame, computer or television, to view your pictures. If you want to transfer your image(s) directly to your computer from FILM2SD, connect FILM2SD to your computer with the included USB cable and select the USB icon (USB Mode) from the Main Menu to establish the connection. FILM2SD will appear as a removable device in "My Computer" (Windows) or on your Desktop (Mac). Once the connection has been established, you can copy the images to your computer by dragging the image files to your hard drive. Note: While FILM2SD is in USB Mode, you will not be able to scan other pictures. To enable scanning again, turn off FILM2SD, then turn it on again and enter Capture Mode. 4 OPERATION & FEATURES When viewing any menus with multiple options, you can use the UP / MIRROR and DOWN / FLIP buttons to move through them and press the OK button to select one. MAIN MENU 1. Capture Mode: Allows you to capture images. FILM2SD will enter Capture Mode automatically if no buttons are pressed Bedienungsanleitung .....
Gebrauchsanweisung Ion FILM 2 SD
Klicken jetzt für den Download