Bedienungsanleitung Longshine FS6105 B

Longshine FS6105 B



DSL 16k: 1s

Downloads bisher: 36


  • Netzwerkverteiler Longshine FS6105 B

  • Vorschau Longshine FS6105 B Handbuch:
    3 LED Definition Please refer to the following table for LED definition 5port 8port LED Status Operation Steady Green Power is on Power Off Power is off Steady Green The port is connected Blinking Green The port is transmitting/receiving data. Link/Act Off No connection Rear Panel 5port 8port 4 Stations Connection Connect each station to the switch by twisted-pair cable. Plug one RJ-45 connector into a RJ-45 port of the switch, and plug the other RJ-45 connector into the station’s network adapter. Power on the switch and then system is ready. For cable selection, refer to the following table. The switch supports port-based QoS as the following table: Model High-priority ports Low-priority ports 5-Port Model: Port 1, 2 Port 3, 4 and 5 8-Port Model: Port 1, 2 and 3 Port 3, 4, 5, 6, 7 and 8 The bandwidth ratio of high priority port to low priority port is 16:1. Switches Connection In making a switch interconnection, you could use any port to connect another switch with straight or crossover cable. As all the ports support auto MDI / MDI-X function, using a straight cable to make a switch-to-switch connection is allowed. For cable selection, refer to the following table: Network Speed Cable Type Max. Length 10Mbps Cat. 3, 4, 5 UTP/STP 100 meters 100Mbps Cat. 5 UTP/STP 100 meters 5 Specification Standard IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x full duplex operation and flow control Interface 5* 10/100Mbps RJ-45 Fast Ethernet Ports 8* 10/100Mbps RJ-45 Fast Ethernet Ports Uplink Auto MDI/MDI-X(Auto crossover) Network Speed 10/100Mbps & Full/Half duplex mode auto detection MAC Address Table 1K MAC address entries Memory 512 K bits (5port) 768 K bits (8port) Power Supply External Power adapter 5VDC 0.6A EMI CE, FCC and VCCI class B .....
    Klicken Sie jetzt für den Download