Bedienungsanleitung Monacor VTM 14

Monacor VTM 14

Sprache(n):
Multi

Dateigröße:
205,01KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 2

Hersteller:
Monacor 

  • Verbindungsgeraet Monacor VTM 14


  • Vorschau Monacor VTM 14 Handbuch:
    Video VGA Converter Please read these operating instructions carefully prior to operation and keep them for later refer- ence. 1 Applications This converter is able to convert composite signals of any video sources (e. g. cameras, video multi- plexers, video recorders, DVD players or games consoles) into a VGA signal for display on a PC monitor. The converter also features a feed-through out- put, e. g. to connect a video recorder or an addi- tional video monitor. An OSD menu is provided to make settings such as brightness, contrast, hue, saturation and resolu- tion. 2 Safety Notes The units (converter and power supply unit) corre- spond to all relevant directives of the EU and are therefore marked with . Please observe the following items in any case: G The units are suitable for indoor use only. Pro- tect them against dripping water and splash water, high air humidity, and heat (admissible ambient temperature range 0 – 40 °C). G Do not operate the converter and immediately disconnect the power supply unit from the socket 1. if one of the units is visibly damaged, 2. if a defect might have occurred after a unit was dropped or suffered a similar accident, 3. if malfunctions occur. In any case the units must be repaired by skilled personnel. G For cleaning only use a dry, soft cloth; never use water or chemicals. G No guarantee claims for the units and no liability for any resulting personal damage or material damage will be accepted if the units are used for other purposes than originally intended, if they are not correctly connected or operated, or if they are not repaired in an expert way. If the units are to be put out of operation definitively, take them to a local recycling plant for a disposal which is not harmful to the environment. WARNING The power supply unit uses danger- ous mains voltage. Leave servicing to skilled personnel only. Inexpert handling may result in electric shock. 3 Mounting and Connection When mounting the converter, e. g. on a wall, fas- ten it with screws via its two mounting brackets (3). When setting it up, glue the rubber feet provided to the lower side of the housing. Always switch off the units before making or changing any connections. 1) Connect the video source to the jack VIDEO IN (4). 2) Connect the VGA monitor to the jack VGA OUT (6). 3) If required, connect an additional video monitor or video recorder to the feed-through output VIDEO OUT (5). The signal present at this jack is the same as the one at the input VIDEO IN. The settings of the converter have no effect on the signal. 4) Connect the plug-in power supply unit provided to the low voltage jack “5 V / .....
    Klicken Sie jetzt für den Download