Bedienungsanleitung Panasonic GP MF622E

Panasonic GP MF622E

Sprache(n):
Englisch


Dateigröße:
104,90KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 1

Hersteller:
Panasonic 

  • Ueberwachungskamera Panasonic GP MF622E


  • Vorschau Panasonic GP MF622E Handbuch:
    - 2 - PREFACE The Panasonic GP-MF622 Machine Vision Camera has a 1/2” Interline Transfer CCD image sensor which features 440 000 pixels, a horizon- tal resolution of 560 lines, and minimum smear. FEATURES 1. Newly developed multi-function solid state image sensor 1/2” Inter Line Transfer type CCD image sensor with 752 (H) x 582 (V) pixels. 2. Selectable scanning system : 1-line interlace and 2-line interlace are avail- able for the highest quality possible within video processing. 3. External synchronization : External HD/VD input enables system setup with external video processors, etc. 4. Frame Reset : External HD and VD reset signals reset the scanning line to the line number 1. 5. High speed shutters up to 1/96 000 second with trigger function enable to achieve strobe-less machine vision system. - 3 - 4. Do not use the strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently. 5. Clean the CCD faceplate with care. Do not clean the CCD with strong or abra- sive detergents. Use lens tissue or a cotton tipped applicator and ethanol. 6. Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused. PRECAUTIONS 1. Do not attempt to dissemble the camera. To prevent electric shock, do not remove screws or covers. There are no serviceable parts inside. Ask a qualified service person for servicing. 2. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could be dam- aged by improper handling or shortage. 3. Do not expose the camera to rain or moisture, or try to operate it in wet areas. This camera is designed for indoor use. Turn the power off immediately and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock. - 4 - 7. Do not drop anything inside the camera. Dropping metal for example inside the cam- era could permanently damage the unit. If anything is dropped inside the camera, turn the power off immediately and ask a quali- fied service person for servicing. 8. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera under conditions where temperature is between −10°C - +50°C (14°F - 122°F), and humidity is below 90 %. The input power source is DC 12 V, 170 mA. .....
    Klicken Sie jetzt für den Download