Bedienungsanleitung Panasonic KX P7110

Panasonic KX P7110

Sprache(n):
Englisch


Dateigröße:
127,29KB

Downloadzeit:
DSL 16k: 1s

Downloads bisher: 1

Hersteller:
Panasonic 

  • Ausdruckgeraet Panasonic KX P7110


  • Vorschau Panasonic KX P7110 Handbuch:
    2 4 Click KX-P7110 and click Install Network Utilities. 5 Follow the instructions until the screen below is displayed. 6 Click on theYes check button, and then click . 7 Click the KX-P7110 printer you want to set up in the list. To select the printer, refer to the MAC address confirmed at step 2. 8 Click the Setup menu and select Network Setup…. 9 Click the TCP/IP tab. 10 Remove the check of the Use DHCP/BOOTP check box, then enter IP address, Subnet Mask and Default Gateway. Click . 11 Confirm the setting and click . You will see the message “Update is completed. Do you wish to reset the printer?”. 12 Click . 13 Click Device menu and select Exit. ■ Step 3: Installing the LPR Port on the Computer 1 Confirm the printer is ready for printing. 2 Insert the printer CD-ROM into the CD-ROM drive and click KX-P7110. 3 Click Install Network Port. 4 Follow the instructions until the screen below is displayed. 5 Click on the Yes check button, and then click . 6 Click on the Print by using LPR check button and click . 7 Enter the IP address or host name of the printer. • Clicking will display the list of printers on the network. 8 Click . 9 Change the print port name (ex. KX-P7110 No.1) if needed. • By default, the IP address: lp will be automatically assigned to the Destination print port name. Note: • Destination print port name should be a unique name because it is used as the printer port name when setting the printer driver. 10 Click . 11 Click . Finish Setup OK Yes Finish Next Search Next Next Finish 3 Windows ■ Step 4: Installing the Printer Driver and Selecting the Printer Port If the printer driver is already installed, refer to the “Network” section in the Operating Instructions. 1 Insert the printer CD-ROM into the CD-ROM drive and click KX-P7110. 2 Click Install Printer driver and Utilities. 3 Follow the instructions until the screen below is displayed. 4 Click on the check box of the installed options in your printer. Click . 5 Click the LPR port (ex. KX-P7110 No.1) you created on the previous step from the Select the current port list, then click . 6 Click . Note: • Change the spool setting to disable bi-directional support in the printer driver as follows: (1) Display the printers folder (Start-Settings- Printers). (2) Click the printer using the right mouse button and select Properties. (3) Click the Details tab and click Spool Settings…. (4) Click on the Disable bi-directional support for this printer check box. ■ Steps 1 and 2 Perform steps 1 and 2 of “LPR Port Printing in Windows 95 /Windows 98 / Windows Me” on page 1. For Windows 2000, skip the next step 3. *1Micr .....
    Klicken Sie jetzt für den Download