Bedienungsanleitung Sony DTC 690

Sony DTC 690



DSL 16k: 1s

Downloads bisher: 24


  • Digital Audio Tape Deck Sony DTC 690

  • Vorschau Sony DTC 690 Handbuch:
    4 Precautions On safety • Operate the unit only on 120 V AC, 60 Hz. • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. • Unplug the unit from the wall outlet if it is not to be used for an extended period of time. To disconnect the cord, pull it out by grasping the plug. Never pull the cord itself. • AC power cord must be changed only at the qualified service shop. Operation Before making program source connections, be sure to unplug the unit. Installation Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. Moisture Condensation If the unit is brought directly from a cold to a warm location, moisture may condense inside the unit. In this condition, the tape may adhere to the head drum and be damaged, or the unit may not operate correctly. Always remove the cassette when the unit will not be used. If moisture is present... • Function controls will not operate. • All operations will stop. When the CAUTION indicator lights and the unit will not operate Leave the unit turned on for about an hour. NOTE When closing the cassette compartment, do not push the cassette lid forcibly by hand, but perform with the 0OPEN/CLOSE button. For the customers in the U.S.A. For detailed safety precautions, see the “IMPORTANT SAFEGUARDS” leaflet. If you have any question or problem concerning your unit, please consult your nearest Sony dealer. Serial copy management system (SCMS) This unit utilizes the serial copy management system that permits digital-to-digital recording for one generation. You can record CD sound or other digital formats through a digital-to-digital connection. (See page 54.) Three sampling frequencies Recording/playback can be done with three sampling frequencies (48 kHz, 44.1 kHz and 32 kHz). 48 kHz: For analog and digital input signals in a standard mode. 44.1 kHz: For compact disc and pre-recorded DAT tape. 32 kHz: For analog input signals in a long-play mode. Long play mode This unit can operate in a long-play mode. Analog input signals can be recorded or playback for up to four consecutive hours when the DT-120 DAT cassette tape is used. The sampling frequency will be 32 kHz in the long-play mode. Visible cassette loading You can view the tape operation through the lid of the cassette compartment. Due to a r .....
    Klicken Sie jetzt für den Download