Bedienungsanleitung VoodooLab Pedal Power 2 Plus

VoodooLab Pedal Power 2 Plus



DSL 16k: 1s

Downloads bisher: 38

Voodoo Lab 

  • Soundpedal VoodooLab Pedal Power 2 Plus

  • Vorschau VoodooLab Pedal Power 2 Plus Handbuch:
    Please visit our web site at: Copyright ©1998-2010 by Digital Music Corporation. This publication is protected by copyright and all rights are reserved. Voodoo Lab and Pedal Power are trademarks of Digital Music Corp. rev 3/15/10 VOODOO LAB PEDAL POWER User’s Manual Introduction The Voodoo Lab Pedal Power 2 Plus is the finest power supply available for guitar effects. It’s eight 9V outputs will power any type of battery operated effect. Each output is completely isolated, short-circuit protected, highly filtered and regulated. This insures reliable operation, free of hum and noise. Pedal Power 2 Plus includes two high current outputs, capable of properly powering newer high power effects such as Boss Twin, Line 6 modelers, and TC Electronic Nova pedals. It also features two variable voltage outputs to simulate worn batteries. Using an optional voltage doubler cable, you can power many 18V and 24V effects as well. Please take the time to read this entire manual before operating your Voodoo Lab Pedal Power. This will eliminate the possibility of damage to your effects from improper usage. You can also visit our web site at for the latest information on this and other products. Important: Pedal Power units purchased in North America should only be powered from 120VAC. Attempting to use 220-240VAC mains directly will cause permanent damage to your Pedal Power! You must use an appropriate stepdown transformer. Unpacking Your Voodoo Lab Pedal Power box should contain the following: Pedal Power 2 Plus system unit Warranty card AC power cord DC Power cables: 5.5x2.1mm right angle barrel connectors (6) 5.5x2.1mm straight barrel connectors (2) 5.5x2.5mm “red” barrel (1) 3.5mm mini plug (1) 9V battery snap (1) Please take a moment to fill out and mail your warranty card. This will register your warranty, make you eligible for technical support, and allow us to notify you with updates and new product information. Don’t worry, we respect your privacy and never sell our mailing list. System Unit Description 1. AC auxiliary. This is a courtesy AC outlet for convenient powering of AC powered effects or a MIDI foot controller. Note the 200 watt maximum rating. Do NOT plug in your amp here! 2. AC power input jack. This is a standard “IEC-type” connector. 3. Power indicator. This LED indicates the Pedal Power system unit is operating. 4. DC output jacks (8). Each output provides 9 volts of isolated, filtered and regulated DC power for your pedal effects. 5.  SAG controls. Next to output jacks 7 and 8 are controls to vary the voltag .....
    Klicken Sie jetzt für den Download